Making a cover for a Wave3 catalytic heater

Topic: Making a cover for a Wave3 catalytic heater (Read 198 times) previous topic - next topic

0 Members and 1 Guest are viewing this topic.

Making a cover for a Wave3 catalytic heater

March 08, 2021, 06:46:03 pm

I recently added a wall-mounted Wave 3 cat heater to my Airstream and bought the matching Camco cover. Well, I hated the cover. It's stiff, ill-fitting, and ugly. So I made my own. I've posted printable patterns and instructions for making either a vertical or horizontal cover on my website, if anybody's interested.

(These patterns would require modification if you have a free-standing Wave 3.)

Re: Making a cover for a Wave3 catalytic heater

Reply #1 – March 08, 2021, 09:42:07 pm

I am thrilled with this pattern....PERFECT TIMING.

thank you,

Re: Making a cover for a Wave3 catalytic heater

Reply #2 – March 08, 2021, 10:41:44 pm

My Wave 3 instructions said NOT to mount that model horizontal. Only the 6 & 8 size can be horizontal.

Re: Making a cover for a Wave3 catalytic heater

Reply #3 – March 09, 2021, 08:59:19 am

Thanks, Mike. I created the original versions of those patterns a few years ago; looks as if Camco has changed their recommendation since then.

Log in

Lazy Daze Owners' Group

March 08, 2021, 06:46:03 pm

Reply #1 – March 08, 2021, 09:42:07 pm

Reply #2 – March 08, 2021, 10:41:44 pm

Reply #3 – March 09, 2021, 08:59:19 am

Affiliate Notice