Log In | Register
Skip to main content
Topic: Hellwig Sway bars on 1989 LD 22" RB (Read 182 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Hellwig Sway bars on 1989 LD 22" RB
I am commencing the upgrades that I want to do on my newly acquired 1989 LD MMH with the rear bath. I am having new Helwig sway bars installed fore and aft on the rig prior to commencing the engine upgrades. The mechanics at the repair shop that is performing the work have informed me that the front sway brackets do not fit the current sway bar bracket holes. Has anyone else encountered this problem and if so what was your solution. I am a retired Navy Master Chief Petty Officer with 30 years of Naval service. When I had a problem that was supposedly unsolvable I went to the Chiefs mess and found the one who knew the answer. This is my new Chiefs Mess. Who has a solution?
 Many thanks in advance

Tom Dangelo
1989 22' G30
Re: Hellwig Sway bars on 1989 LD 22" RB
Reply #1 –
Tom,

Please call Hellwig Products at 1-800-HELLWIG (435-5944) and ask for tech support. When I had an installation issue with my front sway bar hardware I called Hellwig and the tech promptly identified the problem and sent the correct hardware to me overnight. The company is in Visalia, California.

Charles
Harvest Hosts + Boondockers Welcome #23975
Escapees SKP #138195
2007 23.5' Twin King
Re: Hellwig Sway bars on 1989 LD 22" RB
Reply #2 –
Quote from: cortezit  - 
I am a retired Navy Master Chief Petty Officer with 30 years of Naval service. When I had a problem that was supposedly unsolvable I went to the Chiefs mess and found the one who knew the answer. This is my new Chiefs Mess.
 

And let's hope the coffee is better here, Master Chief!  ;D
Greg & Victoria
2017 Mid-Bath  “Nocona” towing a manual 2015 Forester
Previously a 1985 TK
SKP #61264