Log In | Register
Skip to main content
Topic: Voltage still present after fuse is pulled. (Read 205 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Voltage still present after fuse is pulled.
We have a 1998 30 IB. When changing the light fixtures near the bed, I measured the voltage at 13.3 volts. I then pulled all three 20 amp lighting fuses and checked the voltage again. It measured 8.3 volts. Any ideas where the phantom voltage may be coming from?
1998 30' Island Bed
Re: Voltage still present after fuse is pulled.
Reply #1 –
Do you have a solar panel? If you do, you need to pull the solar fuse too.

Steve K
Steve K

2003 Mid-bath
Re: Voltage still present after fuse is pulled.
Reply #2 –
Therman,
Does you fuse board have built in LED blown fuse indicators?  The appliance is the ground B- for the LED blown fuse indicators.

Rodney
1988 Mid Bath
 
Re: Voltage still present after fuse is pulled.
Reply #3 –
Rodney is correct. If the LEDs are there, this is not a problem.

Steve
2004 FL
2013 Honda Fit