Log In | Register
Skip to main content
Topic: Upgrading interior lights to LED (Read 334 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Upgrading interior lights to LED
In November we changed our fluorescent tube lights to LED tube lights to reduce power usage and to improve the brightness inside the coach.
I ordered the LED tube lights from Amazon. I found they take 18” tubes which are standard size.  To prepare the light fixtures, I popped the plastic cover off, removed the tubes by rotating to unlock then pulling down gently, unscrewed the six screws, removed the wire caps to release the wires so I could release the entire light fixture. I then popped the metal interior piece out to expose the circuitry.  Now I’m ready to change the wiring for the LED tubes. See pictures.
For step by step video, visit RV Repair see their video list.
This was not as easy as the video shows, we ended up breaking a few of the connectors off the wires and had to solder them back together.  Changing out the lights has made a nice difference to the brightness inside the coach.
SoCal-Gal  (Tracy)
1991 26.5 RB
Previous 1988 22’ LD Multi plan
Previous 1992 Six-pack Camper
Spare the sealant, spoil the job.
Travelers: Tracy, spouse Anthony, Coton de Tulear, Gabby and parrotlet, Indigo
 
Re: Upgrading interior lights to LED
Reply #1 –
Your light tubes were definitely ready for replacement, you won't believe the difference. If you think you have to much light, just remove one tube.

Jon
1994 MB