Text only | Text with Images

Lazy Daze Owners' Group

Lazy Daze Forums => Lazy Daze Technical => Topic started by: Therman on August 16, 2021, 07:05:36 pm

Title: Voltage still present after fuse is pulled.
Post by: Therman on August 16, 2021, 07:05:36 pm
We have a 1998 30 IB. When changing the light fixtures near the bed, I measured the voltage at 13.3 volts. I then pulled all three 20 amp lighting fuses and checked the voltage again. It measured 8.3 volts. Any ideas where the phantom voltage may be coming from?
Title: Re: Voltage still present after fuse is pulled.
Post by: Steve K. on August 17, 2021, 06:46:00 am
Do you have a solar panel? If you do, you need to pull the solar fuse too.

Steve K
Title: Re: Voltage still present after fuse is pulled.
Post by: rodneyhelfrich on August 17, 2021, 09:00:03 am
Therman,
Does you fuse board have built in LED blown fuse indicators?  The appliance is the ground B- for the LED blown fuse indicators.

Title: Re: Voltage still present after fuse is pulled.
Post by: Steve on August 17, 2021, 10:19:49 am
Rodney is correct. If the LEDs are there, this is not a problem.

Steve
Text only | Text with Images