Print Page - Making a cover for a Wave3 catalytic heater

Title: Making a cover for a Wave3 catalytic heater
Post by: Andy Baird on March 08, 2021, 06:46:03 pm

I recently added a wall-mounted Wave 3 cat heater to my Airstream and bought the matching Camco cover. Well, I hated the cover. It's stiff, ill-fitting, and ugly. So I made my own. I've posted printable patterns and instructions (http://www.andybaird.com/Eureka/pages/cat-cover2.htm) for making either a vertical or horizontal cover on my website, if anybody's interested.

(These patterns would require modification if you have a free-standing Wave 3.)

Title: Re: Making a cover for a Wave3 catalytic heater
Post by: spartan11 on March 08, 2021, 09:42:07 pm

:D I am thrilled with this pattern....PERFECT TIMING.

thank you,

Title: Re: Making a cover for a Wave3 catalytic heater
Post by: LazyMike on March 08, 2021, 10:41:44 pm

My Wave 3 instructions said NOT to mount that model horizontal. Only the 6 & 8 size can be horizontal.

Title: Re: Making a cover for a Wave3 catalytic heater
Post by: Andy Baird on March 09, 2021, 08:59:19 am

Thanks, Mike. I created the original versions of those patterns a few years ago; looks as if Camco has changed their recommendation since then.

Lazy Daze Owners' Group

Lazy Daze Forums => Lazy Daze Technical => Topic started by: Andy Baird on March 08, 2021, 06:46:03 pm